GSi Smart Climate 310, User Manual

Page: 16 / 102

16 Smart Climate 310 rev. 03
USER SETUP
Activating the Password
The user can define a password to restrict access to certain
functions. The password must be entered each time one of these
functions is selected.
When the correct password is entered, it does not need to be re-
entered until the display times out after 15 minutes of inactivity.
The password is a sequence of three numbers from 0 to 99.
To disable the password, set the password to 0, 0, 0 which is the
default password.
To change the password,
1. Press Adjust . The first two digits of the password flash on
the display.
2. Use the arrow keys to enter the first digit.
3. Press
Adjust to step to the next digit.
4. Use the arrow keys to enter the second digit.
5. Repeat steps 3 and 4 for the third digit.
Setting the Time and Date
To set the time and date, proceed as follows:
1. Press
Current Conditions .
2. Use the current conditions arrow keys to select the time
and date.
3. Press Adjust . The hours flash on the display. Use the
arrow keys to set the hours.
4. Press Adjust . The minutes flash on the display. Use the
arrow keys to set the minutes.
5. Press Adjust once again. The seconds flash on the
display. Use the arrow keys to adjust the seconds to the
desired value.
6. Press
Adjust
. The month flashes. Use the arrow keys to
set the month.