-40-
Model G0853 (Mfd. Since 07/18)
65. Install and align riving knife (refer to Riving
Knife Alignment beginning on Page 49 for
detailed information).
66. Close blade cover. Center sliding table and
lock in place.
64. Thread arbor nut on counterclockwise and
fully tighten it to secure the blade (see
Figure 65).
Figure 65. Main blade installed on arbor.
61. Push down on locking pin with one hand (see
Figure 62) as you rotate arbor nut clockwise
with wrench. This will force blade locking
pin into arbor indent and prevent arbor from
rotating in next steps.
Before proceeding with the next steps, wear
gloves to protect your hands when handling
and installing the blade.
63. Slide main blade (not included) over arbor
with teeth facing to the right, then install
flange (see
Figure 64).
Figure 64. Main blade component assembly.
Arbor
Flange
Arbor
Nut
Upper Teeth
Facing Right
62. Continue unthreading arbor nut clockwise (it
has left-hand threads) until you can remove
flange (see
Figure 63).
Figure 63. Main blade arbor parts and tools for
changing blade.
Flange
Arbor Nut
Wrench
Arbor Locking Pin
60. Insert arbor locking pin into access hole
shown in
Figure 62.
Note: Main blade is shown here only for illus-
trative purposes.
Figure 62. Loosening main blade arbor bolt.
Arbor
Locking Pin
Arbor Nut
Summary of Contents for G0853
Page 24: ...22 Model G0853 Mfd Since 07 18 5mm Hardware Recognition Chart...
Page 140: ......
