GRAPHTEC CUTTING PRO FC3100-60, Service Manual

Page: 52 / 175

FC3100-60 Service Manual
P/N53802-031T Rev. A
4 - 16
4.2.6 Adjusting the Y Slider Assembly
Adjusting the Y Slider Roller Pressure
(1) Remove the top cover (see Subsection 4.1.3).
(2) As shown in Figs.4-35 and 4-36, disconnect the Y FPC cable and pen block FPC cable from the
PR216013 pen board.
* Take care not to damage the cables.
Fig. 4-35 Fig. 4-36
(3) Remove the pen board (see Subsection 4.2.2).
•
Two M3 x L6 bind-head screws
(4) As shown in Fig.4-37, reduce the pressure applied by the rollers at the front of the Y slider.
•
M3 x L6 bind-head screw
Fig. 4-37