GRAPHTEC CUTTING PRO FC3100-60, Service Manual, Page: 91 / 175

FC3100-60 Service Manual
P/N53802-031T Rev. A
4 - 55
(4) Slide each of the five Right Side Basket wire ends into the open Basket Tubes on the Left Side Basket.
Fig. 4-125
(5) Gently rock and slide the Right and Left Side Baskets together until both halves are completely seated
on all five Basket Tubes.
(6) Repeat the same process for the second Media Basket.
Fig. 4-126
Mounting the Media Basket
(1) Install one Rubber Bumper on the Left and Right Front Standoffs.
Locate the Standoffs at the front of the Accuload
TM
Film Stocker Bracket.
1. Hold the Rubber Bumper at a slight angle.
2. Catch the Rubber Bumper edge on the standoff.
3. Firmly turn the Rubber Bumper clockwise until it is fully seated on the media bracket.
Fig. 4-127
(2) Install the Front Media Basket as shown.
Fig. 4-128