GRAPHTEC CUTTING PRO FC3100-60, Service Manual

Page: 29 / 175

FC3100-60 Service Manual
P/N53802-031T Rev. A
3 - 1
3. USING CUTTER PENS AND SETTING CUTTING
CONDITIONS
3.1 Types of Cutter Blades and Their Features
Blade part number and
type Diameter and
blade offset value Plunger part
number Applications and features
CB09UA
(super-steel) Diameter
φ
0.9 mm
Blade offset
0.45
PHP32-CB09 Standard blade for cutting color
adhesive film.
Suitable for cutting film up to 0.25 mm
thick.
Maximum cutting distance of
approximately 4000 m.
CB15U
(super-steel) Diameter
φ
1.5 mm
Blade offset
0.75
PHP32-CB15 For cutting film which is too thick for
the CBO9UA blade to handle.
Suitable for cutting film from 0.25 mm
to 0.5 mm thick.
CB15U-K30
(super-steel) Diameter
φ
1.5 mm
Blade offset
0.75
PHP32-CB15 For cutting sandblast rubber. The
sharply angled point provides a longer
cutting edge.
Suitable for cutting material from 0.5
mm to 1.5 mm thick.
CB15-10C
(ceramic) Diameter
φ
1.5 mm
Blade offset
0.50
PHP31-CB15 This is the hardest blade, but may chip
or shatter if dropped or subjected to
impact.
Suitable for cutting material up to 0.05
mm thick.
CB15-05S
(sapphire) Diameter
φ
1.5 mm
Blade offset
0.25
PHP31-CB15 For cutting masking film.
Suitable for cutting material up to 0.05
mm thick.