GRAPHTEC CUTTING PRO FC3100-60, Service Manual, Page: 12 / 175

FC3100-60 Service Manual
P/N53802-031T Rev. A
2 - 2
TEST key
Runs a cutting test to check whether the currently selected cutting
conditions are compatible with the medium loaded.
ORIGIN Key
Used to move the origin point.
To reset the plotter, concurrently press the [ ENTER ] and [ ORIGIN ] keys.
COPY Key
Used to repeat the cutting operation defined by the data in the plotter's
receive buffer.
CONDITION Key
Used to set the four groups of cutting conditions retained in the plotter's
internal memory or to select one group as the current cutting conditions.
NEXT Key
To set a function at the control panel, press the [ PAUSE ] key to select
PAUSE mode and then consecutively press the [ NEXT ] key until the
desired menu appears (see Section 2.2, "Selecting a Function Menu").