GRAPHTEC CS610-11eN, Service Manual

Page: 72 / 132

CS610-UM-251-9370 8-28
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.21 Elevator Sensor
Detaching the elevator sensors
(1) Detach the right cover (see Section 8.1).
(2) Remove the two M2L10 binding head screws holding each elevator sensor.
Low position elevator sensor
M2L10 binding head screw
M2L10 binding head screw
High position elevator sensor
(3) Disconnect the cable from each elevator sensor and then detach each elevator sensor.
Reattaching the elevator sensors
(1) Reattach the elevator sensors in the reverse order in which they were detached.
(2) Adjust the elevator sensor positions (see Section 8.22).