GRAPHTEC CS610-11eN, Service Manual

Page: 19 / 132

CS610-UM-251-9370 4-1
4. DAILY MAINTENANCE
4. INSTALLING THE SOFTWARE
The procedure outlined below is based on the requirement that you are logged on to Windows with administrator
rights. Consult your Windows 2000, Windows XP or Windows Vista manual or Windows Help for more information.
4.1 Installing the Driver Software
4.1.1 Installing the Driver Software for Windows 2000
The following procedure assumes that you are using the CS610-11eN as part of your system, and that
you are using the USB interface. The scanner name displayed in the windows is the name of the scanner
connected to the computer (CS610-11eN is used in this section).
(1) Connect the scanner to the computer, and turn on the computer’s power. Insert the CD-ROM disk
(included with your computer) into the CD-ROM drive of the computer after Windows has started up,
and then turn on the scanner’s power.
(2) The message below appears.
(3) Next, the Found New Hardware Wizard appears.
(4) Click the Next button to proceed to the menu for installing the driver.