GRAPHTEC CS610-11eN, Service Manual

Page: 40 / 132

CS610-UM-251-9370 5-10
5. DAILY MAINTENANCE
(7) After you have clicked tile number 6, click the Set button.
Click the OK button.
(8) To check the color correction results, click the Confirm button.
(9) The following message is displayed. Insert the color correction sheet in the scanner as instructed.
Position the color correction sheet so that the red bar in the center of the sheet is centered in the scanner (but with
the printed side down).
(10) Click the OK button to start scanning.
After scanning has been completed, an enlarged view of the color-corrected data is displayed.
(11) Click the Fit icon to display the entire image, and check whether there is any discrepancy in color. If
there is no discrepancy, color correction is complete. Click the Close button.
If there is still some color discrepancy after performing Color Correction, repeat steps (6) through (11).