GRAPHTEC CS610-11eN Service Manual Download Page 112

Page: 112 / 132

CS610-UM-251-9370

10-22

10. ADJUSTMENTS USING THE SOFTWARE

10.3 Color correction (using a color correction sheet)

(1) Prepare the color correction sheet.
(2) Select “Color Correction” from the “Adjust” menu.

(3) Click the Scan button.

(4) The following message is displayed. Insert the color correction sheet in the scanner.

Position the color correction sheet so that the red bar in the center of the sheet is centered in the scanner (but with
the printed side down).

(5) Click the OK button to start scanning.

The scanned data is displayed when scanning is complete. Colors may differ slightly for individual
sensors, but this does not indicate a defect.

(6) When the data is displayed, click the Get button.

Summary of Contents for CS610-11eN





































































































































Search results

Summary of Contents for CS610-11eN

Reviews:

Related manuals for CS610-11eN

Brands by name

Popular brands

GRAPHTEC CS610-11eN, Service Manual

Search results

Summary of Contents for CS610-11eN

Reviews:

Related manuals for CS610-11eN

Brands by name

Popular brands