P a g e
|
58
GRP260x Administration Guide
Version 1.0.3.42
hook.
Off-hook Auto Dial Delay
Defines the timeout (in seconds) for off-hook auto dial. Valid range is 0-30. If
set to 0, it will be dialed out immediately; If set to other values, it will be dialed
out after the delay.
Off-hook / On-hook
Timeout
If configured, when the phone is in the off-hook or on-hook dialing state, it will
go idle after the timeout (in seconds). Valid range is 10 to 60.
Enable Live Keypad
If enable phone will automatically dials out and turns on handsfree mode as
soon as a dial pad key or softkey is pressed.
Live Keypad Expiration
Set the Live DialPad expire time, interval is between 2s and 15s, default value
is 5s.
Enable Auto Redial
Configures to redial automatically at a later time when the dialed number is
currently busy.
Auto Redial Times
Configures the total times to redial if “Auto Redial” is enabled.
Auto Redial Interval
Configures the interval between each redial if “Auto Redial” is enabled.
Bypass Dial Plan Through
Call History and
Directories
Enable/Disable the dial plan check while dialing through the call history and any
phonebook directories.
Enable Call Completion
Service
If enabled, phone will automatically redial the previous failed call when the
remote party becomes available.
Incoming
Enable Incoming Call
Popup
If enabled, phone will pop up an incoming call window to notify users when there
is an incoming call.
Enable Missed Call
Notification
If enabled, phone will pop up a window to remind users of a missed call
Return Code When
Refusing Incoming Call
When refusing the incoming call. The phone will send the selected type of SIP
message of the call. Available options are:
•
Busy (486).
•
Temporarily Unavailable (480).
•
Not found (404).
•
Decline (603).
Default setting is “Busy 486”.
Allow Incoming Call
Before Ringing
This allows incoming calls after dialed but before ringing. This can be used
under custom user configuration based on need.
Enable Call Waiting
Disables the call waiting feature. The default setting is “Yes”.
Call Waiting Tone
If enabled, phone will play call waiting alert tone when there is an incoming call
