P a g e
|
47
GRP260x Administration Guide
Version 1.0.3.42
Symmetric RTP
Configures whether Symmetric RTP is used or not. Symmetric RTP means
that the UA uses the same socket/port for sending and receiving the RTP
stream. The default setting is "No".
RTP Timeout (s)
Configures the RTP timeout of the phone. If the phone does not receive the
RTP packet within the specified RTP time, the call will be automatically
disconnected. The default range is 0 and 6-600. If set to 0, the phone will not
hang up the call automatically.
Account x
→
Call Settings
Call Features
Auto Answer
If set to “Yes”, the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep. Default setting is “No”.
Auto Answer Numbers
Allows the user to configure specific numbers to auto answer. If not set, all
numbers will be auto answered If auto answer is enabled. Up to 10 numbers
can be configured.
Custom Alert-Info for Auto
Answer
Used exclusively to match the contents of the Alert-Info header for auto
answer. The default auto answer headers will not be matched if this is
defined.
Allow Auto Answer by Call-
Info/Alert-Info
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep, based on the SIP Call-
Info/Alert-Info header sent from the server/proxy.
Default is “Yes”.
Allow Barging by Call-
Info/Alert-Info
When enabled, the phone will automatically put the current call on hold and
answer the incoming call based on the SIP Call-Info/Alert-Info header sent
from the server/proxy. However, if the current call was answered based on
the SIP Call-Info/Alert-Info header, then all other incoming calls with SIP Call-
Info/Alert-Info headers will be rejected automatically. Default setting is “No”.
Send Anonymous
If set to “Yes”, the “From” header in outgoing INVITE messages will be set to
anonymous. Default is “No”.
Anonymous Call Rejection
If set to “Yes”, anonymous calls will be rejected.
The default setting is “No”.
Call Log
Configures Call Log setting on the phone.
•
Log All Calls
•
Log incoming/Outgoing Only (missed calls NOT recorded)
•
Disable Call Log
The default setting is “Log All Calls”.
Transfer on Conference
Configures whether the call is transferred to the other party if the conference
