P a g e
|
102
GRP260x Administration Guide
Version 1.0.3.42
If the p-values listed below are changed while managing configuration on web UI or LCD, the provision
process will be triggered:
* 192 -- Firmware upgrade server
* 232 -- Firmware prefix
* 233 -- Firmware postfix
* 6767 -- Firmware Upgrade Via
* 6768 -- Firmware HTTP/HTTPS Username
* 6769 -- Firmware HTTP/HTTPS Password
* 237 -- Config upgrade Server
* 212 -- Config upgrade via
* 234 -- Config prefix
* 235 -- Config postfix
* 1360 -- Config HTTP/HTTPS username
* 1361 -- Config HTTP/HTTPS password.
Note: P-Value that forces reboot when changes are applied by downloading the config file
When P-value 22421 (or alias “provision.config.forceReboot”) set to 1 in config file, phone will need to
reboot if any change is applied by downloading the config file. Specifically following the process below:
•
First time download:
1.
Phone downloaded a config file (in any supported format) with P22421 set to 1 included.
2.
Phone found there is change(s) comparing with current setting on the phone (Any valid P-value
change, no matter if it does need reboot to apply or not).
3.
Phone will update to new setting (will not save P22421 itself) and will go into normal reboot process
(e.g.: if there is active call, phone will wait until it is finished)
•
Second time download:
4.
After reboot, phone may download the same config file again (if the config file path did not change).
5.
Phone checked the config file and found there is no Pvalue needed to be updated.
6.
Phone will not reboot again.
Note: Certificates and Keys provisioning
