Grandstream Networks GRP260 Series Administration Manual Download Page 80

Page: 80 / 105

P a g e

GRP260x Administration Guide

Version 1.0.3.42

Enable EDRC

Feature

Enable EDRC feature, the remote party will not hear the environmental noise

during a call, this option can either be set to

High Shielding

or to

Soft

Shielding

System Settings

→

TR-069

Enable TR-069

Enables TR-069

ACS URL

URL for TR-069 Auto Configuration Servers (ACS).

Default setting is:

https://acs.gdms.cloud

TR-069 Username

ACS username for TR-069.

TR-069 Password

ACS password for TR-069.

Periodic Inform

Enable

Enables periodic inform. If set to

“Yes”, device will send inform packets to the

ACS. The default setting is “No”.

Periodic Inform

Interval

Sets up the periodic inform interval to send the inform packets to the ACS.

Default is 86400.

Connection Request

Username

The username for the ACS to connect to the phone

Connection Request

Password

The password for the ACS to connect to the phone.

Connection Request

Port

The port for the ACS to connect to the phone.

CPE SSL Certificate

The Cert File for the phone to connect to the ACS via SSL.

CPE SSL Private Key

The Cert Key for the phone to connect to the ACS via SSL.

Start TR-069 at

Random Time

When enabled, TR-069 will send out first INFORM message to server on

randomized timing between 1 to 3600 seconds after phone boots up.

Maintenance Page Definitions

Table 14: Maintenance Page Definitions

Maintenance

→

Upgrade and Provisioning

Firmware

Upgrade via Manually Upload

Upload Firmware File

to Update

Upload and start upgrade firmware.

Upgrade via Network

Firmware Upgrade via

Allows users to choose the firmware upgrade method via TFTP, HTTP or

HTTPS.

Firmware Server Path

Defines the server path for the firmware server.

Summary of Contents for GRP260 Series










































































































Search results

Summary of Contents for GRP260 Series

Reviews:

Related manuals for GRP260 Series

Brands by name

Popular brands

Grandstream Networks GRP260 Series, Administration Manual

Search results

Summary of Contents for GRP260 Series

Reviews:

Related manuals for GRP260 Series

Brands by name

Popular brands