P a g e
|
82
GRP260x Administration Guide
Version 1.0.3.42
Username
Config Server
Password
The password for the HTTP/HTTPS server.
Always Authenticate
Before Challenge
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server.
Config File Prefix
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
Config File Postfix
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded and
flashed into the phone.
Authenticate Conf File
Authenticates configuration file before acceptance.
XML Config File
Password
The password for encrypting XML configuration file using OpenSSL. This is
required for the phone to decrypt the encrypted XML configuration file.
Provision
Auto Upgrade
Automatic Upgrade
Enables automatic upgrade and provisioning.
The default setting is “No”.
Automatic Upgrade
Check Interval (m)
Specifies the time period to check for firmware upgrade (in minutes). The
default value is 10080.
Hour of the Day(0-23)
Defines the hour of the day to check the HTTP/TFTP/FTP server for firmware
Upgrade or configuration files changes. The default value is 1.
Day of the Week(0-6)
Defines the day of the week to check HTTP/TFTP/FTP server for firmware
Upgrade or configuration files changes. The default value is 1.
Randomized
Automatic Upgrade
Randomized Automatic Upgrade within the range of hours of the day or
Post pone the upgrade every X minute(s) by random 1 to X minute(s).
The default setting is “No”
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent:
Always
Check for New Firmware, Check New Firmware only when F/W pre/suffix
Changes, Always Skip the Firmware Check.
The default setting is “Always Check for New Firmware”.
Firmware Upgrade
Confirmation
If set to "Yes", the phone will ask the user to upgrade. If there is no response,
The phone will proceed with the upgrade.
If set to "No", the phone will automatically upgrade without user input.
