P a g e
|
25
GRP260x Administration Guide
Version 1.0.3.42
Connecting the GRP260X
To setup the GRP260X, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router)
using the Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an electrical
outlet. If PoE switch is used in step 3, this step could be skipped (For GRP260xP).
4. The LCD will display Grandstream logo. Before continuing, please wait for the date/time display to show
up.
5. Using the phone embedded web server or keypad configuration menu, you can further configure the
phone using either a static IP or DHCP.
Using Wi-Fi (GRP2602W only):
- On LCD menu, navigate to “Settings → Wi-Fi settings” and enable Wi-Fi.
- Select “Wi-Fi Network” and GRP2602W will automatically start scanning within the range.
- A list of Wi-Fi networks will be displayed. Select the desired network, and if required, enter the correct
password to connect.
- Users can add and connect to a hidden network by accessing “Wi-Fi” Network” and then press on Add
softkey
. Then enter the Network’s information.
Notes:
•
When the GPR2602W is not connected to any network (including Ethernet and Wi-Fi), a prompt
interface will pop up to notify users about it. Users can quickly enter “Wi-Fi Network” page by pressing
on the Wi-Fi softkey.
•
For easy deployment, The GRP2602W is out of the box is preconfigured to connect to a default SSID
named
wp_master
with a password (WPA/WPA2 PSK/WPA3) equal to
wp!987@dmin
, users can
adapt these settings from the web UI as well to make it easier for deployment on customer site.
