Grandstream Networks GRP260 Series Administration Manual Download Page 65

Page: 65 / 105

P a g e

GRP260x Administration Guide

Version 1.0.3.42

OpenVPN® Comp-lzo

Configures enable/disable the LZO compression. When the LZO

Compression is enabled on the OpenVPN server, you must turn on it at the

same time. Otherwise, the network will be abnormal. Default value is YES.

Additional Options

Additional options to be appended to the OpenVPN® config file, separated

by semicolons. For example, comp-lzo no;auth SHA256

Note

: Please use this option with caution. Make sure that the options are

recognizable by OpenVPN® and do not unnecessarily override the other

configurations above.

Network Settings

→

Advanced Settings

Advanced Network Settings

Enable LLDP

Controls the LLDP (Link Layer Discovery Protocol) service. The default setting

is “Enabled”.

LLDP TX Interval

Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600. The default

setting is “60”.

Enable CDP

Enables/Disables CDP “Cisco Discovery Protocol”. The default setting is

“Enabled”.

Layer 3 QoS for SIP

Defines the Layer 3 QoS parameter for SIP. This value is used for IP

Precedence, Diff-Serv or MPLS. The default value is 26.

Layer 3 QoS for RTP

Defines the Layer 3 QoS parameter for RTP. This value is used for IP

Precedence, Diff-Serv or MPLS. The default value is 46.

Enable DHCP VLAN

Enables auto configure for VLAN settings through DHCP. Disabled by default.

Enable Manual VLAN

Configuration

Enables/disables manual VLAN configuration. When this option is set to

Disabled, the phone will bypass VLAN configuration and only use the DHCP

VLAN to configure VLAN tag and priority. Default is “Enabled”.

Layer 2 QoS 802.1Q/VLAN

Tag

Assigns the VLAN Tag of the Layer 2 QoS packets. The valid range is 0

–

4094.The default value is 0.

Layer 2 QoS 802.1p

Priority Value

Assigns the priority value of the Layer2 QoS packets. The valid range is 0

–

7. The default value is 0.

Maximum Transmission

Unit (MTU)

Defines the MTU in bytes. The valid range is 576

– 1500.

The default value is 1500 bytes.

PC Port Mode

Configure the PC port mode.

When set to “Mirrored”, the traffic in the LAN port

will go through PC port as well and packets can be captured by connecting a

Summary of Contents for GRP260 Series










































































































Search results

Summary of Contents for GRP260 Series

Reviews:

Related manuals for GRP260 Series

Brands by name

Popular brands

Grandstream Networks GRP260 Series, Administration Manual

Search results

Summary of Contents for GRP260 Series

Reviews:

Related manuals for GRP260 Series

Brands by name

Popular brands