P a g e
|
76
GRP260x Administration Guide
Version 1.0.3.42
Web Access Mode
Sets the protocol for web interface.
•
HTTPS
•
HTTP
•
Disabled
•
Both HTTP and HTTPS
The default setting is “HTTP”.
Web Access Control
Web access control by using Whitelist or Blacklist on incoming IP addresses
Web Access Control
List
Only allow the IP address list as a whitelist or restrict the IP address list as a
blacklist to access the Web.
Web Session
Timeout
Configures timer to logout web session during idle. The valid range is 2-60 min.
The default value is 10 min
Enable User Web
Access
Administrator can disable or enable user web access.
The default setting is “Enabled”.
Validate Server
Certificates
After enabling this feature, phone will validate the server’s certificate. If the
server that our phone tries to register on is not on our list, it will not allow server
to access the phone.
Web/Restrict mode
Lockout Duration
Specifies the time in minutes that the web or LCD login interface will be locked
out to user after five login failures. This lockout time is used for web login, and
LCD restrict mode admin login. Range is 0-60 minutes.
The default setting is “5”.
Web access attempt
limit
Configure attempt limit before lockout.
Default is 5. Range is 1-10.
User Info Management
Test Password
strength
Checks password strength to ensure better security.
User Password
New Password
Set new password for web GUI access as User. This field is case sensitive.
Confirm Password
Enter the new User password again to confirm.
Admin Password
Current Password
The current admin password is required for setting a new admin password.
New Password
Set new password for web GUI access as Admin. This field is case sensitive.
Confirm Password
Enter the new Admin password again to confirm.
Client certificate
Minimum TLS
Version
Configures the minimum TLS version supported by the phone. Minimum TLS
version must be less than or equal to maximum TLS version.
