Grandstream Networks GRP260 Series Administration Manual Download Page 2

Page: 2 / 105

P a g e

GRP260x Administration Guide

Version 1.0.3.42

COPYRIGHT

https://www.grandstream.com

transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose

without the express written permission of Grandstream Networks, Inc. is not permitted.

The latest electronic version of this guide is available for download here:

https://www.grandstream.com/support

Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc.

in the United States, Europe, and other countries.

CAUTION

Changes or modifications to this product not expressly approved by Grandstream, or operation of this

product in any way other than as detailed by this guide, could void your manufacturer warranty.

WARNING

Please do not use a different power adaptor with devices as it may cause damage to the products and void

the manufacturer warranty.

Summary of Contents for GRP260 Series










































































































Search results

Summary of Contents for GRP260 Series

Reviews:

Related manuals for GRP260 Series

Brands by name

Popular brands

Grandstream Networks GRP260 Series, Administration Manual

Search results

Summary of Contents for GRP260 Series

Reviews:

Related manuals for GRP260 Series

Brands by name

Popular brands