P a g e
|
66
GRP260x Administration Guide
Version 1.0.3.42
PC to the PC port. The default
setting is “Enabled”.
PC Port VLAN Tag
Assigns the VLAN Tag of the PC port. The valid range is 0
– 4094.
The default value is 0.
PC Port Priority Value
Assigns the priority value of the PC port. The valid range is 0
– 7.
The default value is 0.
Proxy
HTTP Proxy
Specifies the HTTP proxy URL for the phone to send packets to. The proxy
server will act as an intermediary to route the packets to the destination.
HTTPS Proxy
Specifies the HTTPS proxy URL for the phone to send packets to. The proxy
server will act as an intermediary to route the packets to the destination.
Bypass Proxy for
Configures the destination IP address where no proxy server is needed. The
phone will not use a proxy server when sending packets to the specified
destination IP address.
Remote Control
Action URI Support
Indicate whether the phone is enabled to receive and handle Action URI
request.
Remote-Control Pop-up
Window Support
Indicate whether the phone is enabled to pop up Allow Remote Control
window.
Action URI Allowed IP
List
List of allowed IP addresses from which the phone receives the Action URI
CSTA Control
Indicates whether CSTA Control feature is enabled. Change of this
configuration will need the system reboot to make it take effect.
CTI Settings
Affinity Support
Indicate whether Affinity feature is supported.
Preferred Account
Affinity target SIP account.
Network Settings
→
SNMP Settings
Enable SNMP
Enable/Disable SNMP service. Default is No.
Version
Choose between (Version 1, Version 2, or Version 3).
Port
Listening Port of SNMP daemon (Default 161).
Community
Name of SNMP community.
