P a g e
|
56
GRP260x Administration Guide
Version 1.0.3.42
Only non-symmetric NAT routers work with STUN.
Use NAT IP
The NAT IP address used in SIP/SDP messages. This field is blank at the
default settings. It should ONLY be used if it is required by your ITSP.
Delay Registration
Configures
specific time that the account will be registered after booting up.
Test Password Strength
Only Allow password with some constraints to ensure better security.
Enable Outbound
Notification
Configures whether to enable outbound notifications such as Action URL.
Public Mode
Enable Public Mode
Configures to turn on/off public mode for hot desking feature.
Public Mode Username
Prefix
Configures the prefix of the username for public mode login.
Public Mode Username
Suffix
Configures the suffix of the username for public mode login.
Allow Multiple Accounts
Configures remaining account with a SIP account and be able to make/receive
calls on the configured account even if the user is not logged in to the public
mode.
- If set to "No", then after the user logs in to the public mode account on LCD,
only the public mode account can be used on the phone even though there are
other configured SIP accounts.
- If set to "Yes," then after the user logs in to the public mode account on LCD,
other configured SIP accounts on the phone can also be used. Note:
Note:
This
option requires enabling public mode to take effect.
Enable Remote
Synchronization
If enabled, the phone will automatically download the current account's settings
from the remote server and upload it to the server.
Server Type
Configures the Server type and protocol used to send requests to the Remote
Synchronization Server.
This can be set to TFTP, FTP, HTTP
Server Path
Configures the server path for the Remote Synchronization feature.
FTP/HTTP Username
The username for FTP/HTTP server.
FTP/HTTP Password
The password for FTP/HTTP server.
Phone Settings
→
Call Settings
General
Key Mode
Account Mode
In Calling State, each key displays the call status of the corresponding account.
Click to switch to the first line under this account or select the account to initiate
