Gotharman Little deFormer 3, User Manual

Page: 72 / 461

72
Oscillator/Sampler/Chopped Keyboard/Noise mode select
Touch the SEL button, to enter this page.
OR: Push and release the Func/Mute button, so that it
lights up, and push step button 6/Osc 3 times.
Xfade: Sample fade mode. Only affects sample playback.
Off: No fading are applied to sample playback.
On: When playing back a sampling, both fade in and fade out will be applied.
Especially effective, to obtain click free audio track playback.
Out: When playing back a sampling, fade out will be applied, to remove clicks at the
sample end.
Smth: Smoothing. The moment that a sampling loops, the transition from the loop
end to the loop start will be smoothed out, to minimize clicks.
FmBus: Sets the FM source audio bus for the oscillator/sampler frequency modulation. FM
amount is set on the OSC page. Audio bus 1 to 8 can be selected.
Porta: Sampler Portamento. The more this is turned up, the slower the sampler pitch will slide
from one note to another. Range: 0 to 511.
Mode: Selects whether the part oscillator should act as an oscillator (Osc), a sampler (Smp), a
chopped keyboard sampler (ChKy), or a noise generator (Nois).
#Smp: Number of samplings. Sets if the part should use 1, 2 or 4 samplings. The 4 samplings are
selected on the SMP page, and the samplings can be selected, using the Chop parameter on the
sampler OSC page.