Gotharman Little deFormer 3, User Manual

Page: 374 / 461

374
Adding a chop point at the selected end point
If you wish to create a loop, for instance for use with the sustained loop feature, you will adjust
the start and endpoints, until the loop sounds as intended.
Then you will save the start point as a chop point.
In order to make the loop work, you will though also need to save the selected end point as a chop
point.
To do this, you must enter the graphical function page again:
Touch “Add Chop At Endpoint”. LD3 will now jump back to the graphical edit page, and a chop
point will be added at the selected end point.