Gotharman Little deFormer 3, User Manual

Page: 69 / 461

69
Loop: Sets the sampling loop mode.
Off: The sample will not loop, just play back one time from the adjusted, or chop selected, start to
end, and then stop. If the selected sampling has chop points, these will always be used.
On: The sample will play back from the adjusted start point, when triggered. When it reaches the
adjusted end point, it will loop back to the start point, and play back the sample over and over
again. If the selected sampling has chop points, these will always be used for the loop points.
Toggle: The looped sample playback will start, when you push and release a trigger button, and
stop when you push and release the same trigger button again.
Sust: When you hit a key, playback of the sampling starts at the sample startpoint.
When the playback reaches the endpoint of the selected chop, it loops back to the chop
startpoint, and keeps looping between the chop start and end point, until a key is pressed again.
OfUc: Off, unchopped . The sample will not loop, just play back one time from the adjusted start to
end, and then stop. Chop points will be ignored.
OnUc: On, unchopped. The sample will play back from the adjusted start point, when triggered.
When it reaches the adjusted end point, it will loop back to the start point, and play back the
sample over and over again. Chop points will be ignored.
Chop: If chop points has been generated for the selected sampling, a chop can be selected by
setting this parameter. If the #Smp parameter on the SEL page is set to 2 or 4 samplings, this
parameter will also select which of the 2 or 4 samplings, that will play back, and the chop points
for smaple 2 to 3. Range: 0 to 63 for sample 1, 64 to 128 for sample 2, 129 to 192 for sample 3,
193 to 255 for sample 4.
In chopped keyboard sample mode, this parameter and the chop modulation selects one of the 4
selected samplings, which will have its chops spread over the keyboard range.
0-63: Sample 1, 64-127: Sample 2, 128-191: Sample 3, 192-255: Sample 4.
#Chp: The number of Chops to be played back in a row. Range: 1 to 64.
FM: FM amount. The more this is turned up, the more the selected FM bus (in the SEL section) will
modulate the pitch of the sampler. Range: 0 to 511.