Good Will Instrument GKP-2302, User Manual

Page: 192 / 249

GKP-2302 User Manual
178
Misc 1: AGC/Acal Makes the AGC/Autocal function
settings. 4.12,4.13
2: DC Adjust Sets the DC offset adjustment. 4.14
Table 5-5 Menus of the Continuous Function (Continued)
Menu Description Refer to
Limiter 1: Ipk Limiter Makes the peak current limiter settings.
4.1.1
2: Irms Limiter Makes the RMS current limiter settings. 4.1.2
3: V/F Limiter Sets the voltage/frequency setting range
limit.
4.1.3,4.1.4
5.2.2 Menus of the Sequence Function
The menus of the Sequence function are shown in Table 5-6. You can open each menu by using
a soft-key. For how to use the Sequence function, see
4.2
.
Table 5-6 Menus of the Sequence Function
Menu Description
Sequence Edit Osc Range Switches the output voltage range.
AC/DC Switches the AC/DC mode.
Misc Time Unit Switches the time unit between ms and s.
Trig Out Sets the trigger output.
File Store Saves to, clears, and renames the Sequence
Memory.
Recall Recalls the Sequence Memory.
Clear Resets the edited sequence to the factory default
settings.
Compile Compiles the edited sequence and moves to the
Sequence Control View.
Sequence Control Start Starts the sequence. It is displayed in the output
on and sequence stopped states.
Stop Ends the sequence. It is displayed in the
sequence running state.
Hold Suspends the sequence. It is displayed in the
sequence running state.
Resume Resumes the suspended sequence. It is displayed
in the sequence suspended state.
Bran1 Branches to a step of the branch 1. It is displayed
in the sequence running state.
Bran2 Branches to a step of the branch 2. It is displayed
in the sequence running state.
Measure Makes the measured value display settings. It is
displayed in the sequence stopped state.
Edit Displays the Sequence Edit View. It is displayed
in the output off state.