Goldschmidt SMARTWELD SPARK, Operation Manual

Page: 37 / 88

37
FR
AN
Ç
AI
S
EN
G
LISH
D
EU
TS
C
H
6.1 Use according to the intended purpose
The electric Thermit ® igniter SMARTWELD SPARK is exclusively designed for
the ignition of Thermit ® portions in crucibles manufactured by Elektro-Thermit
GmbH & Co. KG. The device must only be used and operated according to this
purpose.
Only the corresponding electrodes may be used for ignition. Any use of the device
or its accessories not conforming to or exceeding the specified use is regarded as
an infringement of the intended purpose.
6.2 Use to the contrary of the intended purpose
Any use other than that which is specified in chapter 6.1 is considered use to the
contrary of the intended purpose.
Examples of use to the contrary of the intended purpose:
» Igniting other inflammable substances such as flammable gases,
liquids or fuels.
» Igniting cutting torches or pre-heating torches to heat or cut rails.
» Using the device as a striking or recessing tool or as a substitute
for other tools.
» Using batteries or the battery recharger in other devices
(like cordless powered screwdrivers or drills).
» Using the battery recharger to charge batteries other than the ones
supplied by the manufacturer.
» Using the battery recharger cable to carry the device or pull the plug
from the electrical socket.
» Using the travel case for purposes other than storing and transporting
the device and accessories.
» Transporting and storing other objects, tools and materials in the
travel case.
» Transporting and storing igniters in the travel case.
» Manually cooling the heated electrodes by dipping them in water, sand,
soil, etc.