GMC 2002 Sonoma Owner'S Manual Download Page 305

Page: 305 / 458

5-27

Follow this diagram to store the
underbody

mounted spare.

A. Wheel Wrench

B. Hoist Assembly

C. Retainer

D. Spring

E. Tire

F. Valve Stem

(Pointed Down)

G. Lower

H. Raise

1. Put the tire on the ground at the rear of the vehicle,

with the valve stem pointed down and to the rear.

2. Pull the retainer through the wheel.

3. Put the chisel end of the wheel wrench, on an

angle, through the hole in the rear bumper and into
the hoist shaft.

4. Raise the tire fully against the underside of the

vehicle. Continue turning the wheel wrench until the
tire is secure and the cable is tight. The spare tire
hoist cannot be overtightened.

Summary of Contents for 2002 Sonoma










































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Sonoma

Reviews:

Related manuals for 2002 Sonoma

Brands by name

Popular brands

GMC 2002 Sonoma, Owner'S Manual

Search results

Summary of Contents for 2002 Sonoma

Reviews:

Related manuals for 2002 Sonoma

Brands by name

Popular brands