manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 113

2-43

Windshield Wipers

Turn the band with the wiper symbol on it to operate the
windshield wipers.

MIST: Turn the band to MIST for a single wiping cycle.
Hold it until the windshield wipers start. Then let it go.
The windshield wipers will stop after one wipe. If you
want more wipes, hold the band on MIST longer.

OFF: Turn the band to OFF to turn off the windshield
wipers.

LO (Low Speed): Turn the band away from you to 
LO and past the delay settings for steady wiping at 
low speed.

HI (High Speed): Turn the band away from you, to 
HI, and past the delay settings for wiping steady at 
high speed.

(Delayed Wiping): You can set the wiper speed for a
long or short delay between wipes. Turn the band to
choose the delay time. The closer to LO, the shorter 
the delay.

Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If your blades do become
worn or damaged, get new blades or blade inserts.

Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands