manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 108

2-38

Parking Over Things That Burn

CAUTION:

Things that can burn could touch hot exhaust
parts under your vehicle and ignite. Don’t park
over papers, leaves, dry grass or other things that
can burn.

Engine Exhaust

CAUTION:

Engine exhaust can kill. It contains the gas
carbon monoxide (CO), which you can’t see or
smell. It can cause unconsciousness and death.

You might have exhaust coming in if:
D Your exhaust system sounds strange 

or different.

D Your vehicle gets rusty underneath.

D Your vehicle was damaged in a collision.

D Your vehicle was damaged when driving over

high points on the road or over road debris.

D Repairs weren’t done correctly.

D Your vehicle or exhaust system had been

modified improperly.

If you ever suspect exhaust is coming into 
your vehicle:
D Drive it only with all the windows down to

blow out any CO; and

D Have your vehicle fixed immediately.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands