manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 245

4-27

After Off-Road Driving

Remove any brush or debris that has collected on the
underbody, chassis or under the hood. These
accumulations can be a fire hazard.

After operation in mud or sand, have the brake linings
cleaned and checked. These substances can cause
glazing and uneven braking. Check the body structure,
steering, suspension, wheels, tires and exhaust system
for damage. Also, check the fuel lines and cooling
system for any leakage.

Your vehicle will require more frequent service due to
off

-

road use. Refer to the Maintenance Schedule for

additional information.

Driving at Night

Night driving is more dangerous than day driving. 
One reason is that some drivers are likely to be 
impaired 

--

 by alcohol or drugs, with night vision

problems, or by fatigue.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands