manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 145

2-75

Anti-Lock Brake System Warning Light

With the anti

-

lock brake

system, this light will come
on when you start your
engine and may stay on 
for several seconds. 
That’s normal.

If the light stays on, or comes on when you’re driving,
your vehicle needs service. If the regular brake system
warning light isn’t on, you still have brakes, but you
don’t have anti

-

lock brakes. If the regular brake system

warning light is also on, you don’t have anti

-

lock brakes

and there’s a problem with your regular brakes. See
“Brake System Warning Light” earlier in this section.

The anti

-

lock brake system warning light should come

on briefly when you turn the ignition key to RUN. If the
light doesn’t come on then, have it fixed so it will be
ready to warn you if there is a problem.

Engine Coolant Temperature Gage

United States

Canada

This gage shows the engine coolant temperature. If the
gage pointer moves into the red area, your engine is 
too hot!

It means that your engine coolant has overheated. If you
have been operating your vehicle under normal driving
conditions, you should pull off the road, stop your
vehicle and turn off the engine as soon as possible. See
“Engine Overheating” in the Index.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands