manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 406

Short Trip/City Scheduled Maintenance

7-22

60,000 Miles (100 000 km) (Continued)

j Change automatic transmission fluid and filter if the vehicle is mainly driven

under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly 

reaches 90

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

If you do not use your vehicle under any of these conditions, change the fluid
and filter every 50,000 miles (83 000 km).

j Inspect engine accessory drive belt. 

An Emission Control Service.

j 4.3L V6 Engine Only: Replace fuel filter. 

An Emission Control Service. (See footnote 

[.)

j Replace engine air cleaner filter. 

An Emission Control Service. 

j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper

rotation pattern and additional information. (See fo.) 

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands