manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 326

6-16

As in the chart shown previously, SAE 5W

-

30 is best for

your vehicle. However, you can use SAE 10W

-

30 if it’s

going to be 0

_F (

-

18

_C) or above. These numbers on an

oil container show its viscosity, or thickness. Do not use
other viscosity oils, such as SAE 20W

-

50.

NOTICE:

Use only engine oil with the American 
Petroleum Institute Certified For Gasoline
Engines starburst symbol. Failure to use the
recommended oil can result in engine damage 
not covered by your warranty.

GM Goodwrench

R

 oil meets all the requirements for

your vehicle.

If you are in an area where the temperature falls below

-

20

_F (

-

29

_C), consider using either an SAE 5W

-

30

synthetic oil or an SAE 0W

-

30 oil. Both will provide

easier cold starting and better protection for your engine
at extremely low temperatures.

Engine Oil Additives

Don’t add anything to your oil. The recommended oils
with the starburst symbol are all you will need for good
performance and engine protection.

When to Change Engine Oil

If any one of these is true for you, use the short trip/city
maintenance schedule:
D Most trips are less than 5 miles (8 km). This is

particularly important when outside temperatures are
below freezing.

D Most trips include extensive idling (such as frequent

driving in stop

-

and

-

go traffic).

D Your vehicle has a 2200 L4 (Code 5) flexible fuel

engine and you have used E

-

85 ethanol fuel.

D You frequently tow a trailer.
D The vehicle is used for delivery service, police, taxi

or other commercial application.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands