manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 152

2-82

Fuel Gage

United States

Canada

When the ignition is on, the fuel gage tells you about
how much fuel you have remaining.

Here are four things that some owners ask about. None
of these show a problem with your fuel gage:
D At the gas station, the gas pump shuts off before the

gage reads full.

D It takes a little more or less fuel to fill up than the

gage indicated. For example, the gage may have
indicated the tank was half full, but it actually took a
little more or less than half the tank’s capacity to fill
the tank.

D The gage moves a little when you turn a corner or

speed up.

D The gage doesn’t go back to empty when you turn

off the ignition.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands