manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 101

2-31

Shift Speeds

CAUTION:

If you skip a gear when you downshift, you could
lose control of your vehicle. You could injure
yourself or others. Don’t shift down more than
one gear at a time when you downshift.

If your vehicle has four

-

wheel drive and is equipped

with a manual transmission, disregard the SHIFT light
when the transfer case is in 4LO.

Four

-

Wheel Drive (If Equipped)

If your vehicle has four

-

wheel drive, you can send your

engine’s driving power to all four wheels for extra
traction. To get the most satisfaction out of four

-

wheel

drive, you must be familiar with its operation. Read the
part that follows before using four

-

wheel drive. You

should use two

-

wheel high (2HI) for most normal

driving conditions.

NOTICE:

Driving in the 4HI or 4LO positions for a long
time on dry or wet pavement could shorten the
life of your vehicle’s drivetrain.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands