manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 51

1-44

Restraint Systems for Children

An infant car bed (A), a special bed made for use in a
motor vehicle, is an infant restraint system designed to
restrain or position a child on a continuous flat surface.
Make sure that the infant’s head rests toward the center
of the vehicle.

A rear

-

facing infant seat (B) provides restraint with 

the seating surface against the back of the infant. The
harness system holds the infant in place and, in a crash,
acts to keep the infant positioned in the restraint.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands