manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 356

6-46

4. To install the new wiper insert, slide the insert (D),

notched end last, into the end with two blade 
claws (A). Slide the insert all the way through the
blade claws at the opposite end (B). The plastic 
caps (C) will be forced off as the insert is fully
inserted.

5. Be sure that the notches are locked by the bottom

claws. Make sure that all other claws are properly
locked on both sides of the insert slots.

A. Claw in Notch

B. Correct Installation

C. Incorrect Installation

6. Put the blade assembly pivot in the wiper arm 

hook. Pull up until the pivot locking tab locks in 
the hook slot.

7. Carefully lower the wiper arm and blade assembly

onto the windshield.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands