manualshive.com logo in svg

GMC 2002 Sonoma, Owner'S Manual

Share
Download
GMC 2002 Sonoma Owner'S Manual Download Page 115

2-45

CAUTION:

D Cruise control can be dangerous where you

can’t drive safely at a steady speed. So,
don’t use your cruise control on winding
roads or in heavy traffic.

D Cruise control can be dangerous on

slippery roads. On such roads, fast changes
in tire traction can cause needless wheel
spinning, and you could lose control. Don’t
use cruise control on slippery roads.

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch off until you want to use
cruise control.

1. Move the cruise control switch to ON.

2. Get up to the speed you want.

3. Press in the SET button at the end of the lever and

release it.

4. Take your foot off the accelerator pedal.

Summary of Contents for 2002 Sonoma











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands