“NEO” TV SATELLITE ANTENNAS
84
www.glomex.it
ENGLISH
To connect the coaxial cables to VL, HL, VH and
HH sockets of the coaxial rotating joint it is nec-
essary to remove the upper radome and to con-
nect the various cables to the connectors (1)
available inside the lower radome, trying to give
the cables a path that follows the curvature of
the radome.
NOTA:
for some models, there is a single bracket
with 4 connections instead of 2 brackets with 2
connections each.
7. Build in the control unit by using the GLOMEX
accessory (code 4.010.0008) by boring a hole
with a reciprocating saw and using the drill
with 2.5 mm tip (use the cutting template in
Fig. 32 for correct dimensions).
Connect the 1.5 m coaxial cable to the satel-
lite receiver.
8. Connect the cables to the line amplifier (is
available), to the multiswitch (if available), to
the receiver(s) (not included), as indicated in
Fig. 30.
Fig. 31
