“NEO” TV SATELLITE ANTENNAS
71
www.glomex.it
ENGLISH
4.
NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- 8.5 mm drill tip for radome assembly (2).
- 28 mm hollow mill for drilling the passage
hole for the antenna connector cable (3).
- Phillips screwdriver (with adequate dimen-
sions for control unit installation) (4).
- 11 mm wrench (for the installation of the coax-
ial cable connectors) (5).
- Reciprocating saw (to create the compart-
ment in case of wall built-in installation of the
control unit; use the template provided on
page
86
) (6).
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various com-
ponents, the distance between them, the length
of the various cables and the accessibility to the
equipment once it is installed.
S
WARNING
Always lift the antenna from the lower radome
and never from the upper radome or any part
inside it.
Fig. 4
Upper radome
Lower radome
