“NEO” TV SATELLITE ANTENNAS
79
www.glomex.it
ENGLISH
5. Drill the 4 holes for the passage of the
threaded bars by means of an electric drill
and a 8.5 mm drill tip on the supporting sur-
face.
6. Drill the hole for cable passage by means of
an electric drill and a 28 mm hollow mill.
7. Position the rubber seal so that the holes
match.
8.
SATURN 4dCSS (V9104NDCSS) and MARS
dCSS (V9804NDCSS and V9804NSKEW/
DCSS):
Position the antenna onto the seal,
and firstly insert the cable through the rele-
vant hole, then the 4 screws, and pay atten-
tion to direct the orientation symbol of the
antenna towards the bow.
SATURN 4 (V9104N) and MARS (V9804N and
V9804NSKEW):
Have the four 10 m cables
pass through the previously drilled hole and
insert them inside the antenna through the
hole in the antenna’s lower radome
9. Install the fastening reinforcements onto the
threaded bars and screw in the M8 self-lock-
ing nuts.
10. Completely tighten.
Fig. 21
Fig. 22
Fig. 23
Fig. 24
