“NEO” TV SATELLITE ANTENNAS
77
www.glomex.it
ENGLISH
ANTENNA WITH UNIVERSAL FOUR-OUTPUT
LNB
NEO DCSS ANTENNA
3. The power supply line must be min 24V 5A
(12V Pandora model only); the positive pole
must be connected to the red cable while the
negative one to the black cable. The power
supply line must have cables with a minimum
cross section of 2.5 mm2 with a length up to 4
m, of 4 mm2 for longer cables. If the power
supply line is 12V, use the 12DC to 24DC con-
verter provided.
S
WARNING
Do not use power supply from secondary cir-
cuits. This could jeopardize the operation of the
equipment.
NOTA:
The polarity inversion on the power sup-
ply blows the fuse to prevent any damage to the
antenna.
S
WARNING
Pay attention not to bend the coaxial cables at a
right angle; the bending angle must always be
higher than 120°.
S
WARNING
The “NEO” one-output satellite antenna is
designed to operate with a single decoder;
therefore, do not install signal splitters upstream
or downstream the control unit.
GL00283
From the
antenna
To the multi-
switch (see
Fig. 29
)
Fig. 16
Red
Black
24Vdc power
supply cable
From the
antenna
To the satellite
receiver (not
provided) /
dCSS splitter
(not provided
Fig. 17
24Vdc power
supply cable
Red
Black
Fig. 18
