“NEO” TV SATELLITE ANTENNAS
76
www.glomex.it
ENGLISH
12. Make sure that the cable core is correctly
inserted in the central hole of the female con-
nector on the antenna (otherwise, there could
be a short circuit and the fuse installed on the
cable would trip).
Manually screw in the ring nut of connector F.
Once the ring nut has been manually
screwed in, tighten by ¼ turn by means of a 11
mm wrench.
NOTA: NEO PANDORA V8001N, NEO RHEA
V8100N, NEO SATURN dCSS V9104DCSS:
For
the connection of the antenna coaxial cable, it is
not necessary to remove the upper radome!
S
WARNING
For a correct assembly, respect the installation
direction indicated in
Fig. 11
.
A different installation from the recommended
one could cause an incorrect operation of the
antenna due to the risk of water penetration into
the radome.
Operations to be carried out
inside
the boat.
1. Determine the correct position for the control
unit:
- it must be positioned near the satellite
receiver, as the provided coaxial cable is 1.5
m long;
- it must be reached by the power supply
cables coming from the control panel;
- it must be reached by the coaxial cable
coming from the antenna (10 m long);
- it must be positioned in a dry and ventilated
area.
2. Connect the coaxial cable of the antenna
(previously installed) to the ANTENNA IN
input on the control unit and the 1.5 m coaxial
cable to the RECEIVER OUT output on the
control unit.
Make sure that the cable cores are correctly
inserted in the central holes of the relevant
female connectors on the control unit (other-
wise, there would be a short circuit and the
fuse installed on the cable would trip).
Manually screw in the ring nuts of connectors
F.
Once the ring nuts have been manually
screwed in, tighten by ¼ turn by means of a 11
mm wrench.
S
WARNING
The inversion of the two cables jeopardizes the
operation of the equipment. Make sure you have
correctly installed the coaxial cables. In case of
damage, GLOMEX will not be directly liable for
the damage suffered by the receiver.
ANTENNA WITH UNIVERSAL ONE-OUTPUT
LNB
Central coaxial cable
conductor
Fig. 14
From the
antenna
To the satellite
receiver
Fig. 15
24Vdc power
supply cable (
12Vdc
for the NEO Pandora
V8001N model
)
Red
Black
