“NEO” TV SATELLITE ANTENNAS
78
www.glomex.it
ENGLISH
NOTA:
Do not cut the connectors of the coaxial
cables (the operation would not be guaranteed
any more) and always use the original GLOMEX
cables supplied, even with inappropriate dimen-
sions (too long).
Do not use different cables, as
it would jeopardize the operation of the equip-
ment.
4. Build in the control unit by using the GLOMEX
accessory (code 4.010.0008) by boring a hole
with a reciprocating saw and using the drill
with 2.5 mm tip (use the cutting template in
Fig. 33
for correct dimensions).
5. Connect the 1.5 m coaxial cable to the satel-
lite receiver.
NOTA:
Maximum wall thickness for mounting the
control unit: 20 mm.
S
WARNING
If the control unit led flashes alternately red and
green, there is no communication between the
antenna and the control unit.
It is therefore necessary to check that the con-
nection cable between antenna and control unit
is correctly fastened and is not interrupted or
short-circuited.
6.2 “NEO” SATURN 4 , “NEO” MARS AND
“NEO” RHINE ANTENNAS
S
DANGER
While installing the antenna, wear the appropri-
ate safety equipment for the job to be carried
out.
1. First of all, make sure you have chosen a cor-
rect position to install the antenna (see sec-
tion 5: “Installation”).
2. Remove the antenna from the packaging box.
Remove the screws from the lower radome.
3. Underneath the base of the antenna, insert
the 4 M8 threaded bars and use a liquid
thread locking product (Loctite®638).
4. Use cutting template 6.1
on page
85
and use
a felt-tip pen to mark the holes for the
threaded bars and cable passage.
Fig. 19
Fig. 20
