“NEO” TV SATELLITE ANTENNAS
74
www.glomex.it
ENGLISH
6.
ASSEMBLY
6.1 “NEO” PANDORA, “NEO” RHEA AND
“NEO” DCSS SATURN 4
S
DANGER
While installing the antenna, wear the appropri-
ate safety equipment for the job to be carried
out.
1. First of all, make sure you have chosen a cor-
rect position to install the antenna (see sec-
tion 5: “Installation”).
2. Remove the antenna from the packaging box.
3. Use cutting template 6.1 on page 85 and use
a felt-tip pen to mark the holes for the screws
coming out of the antenna and for and cable
passage.
4. Drill the 4 holes for the passage of the 4
screws coming out of the antenna using an
electric drill and a 8.5 mm drill tip on the sup-
porting surface.
5. Drill the hole for cable passage by means of
an electric drill and a 28 mm hollow mill.
6. Position the rubber seal so that the holes
match.
Fig. 8
Fig. 9
Fig. 10
