“NEO” TV SATELLITE ANTENNAS
80
www.glomex.it
ENGLISH
S
WARNING
GLOMEX declines any liability for an incorrect
mounting of the radome on the boat.
11. If the cable
(s)
(s) need to be made shorter,
please refer to the instructions given in Fig. 25.
12. Make sure that the cable core is correctly
inserted in the central hole of the female con-
nector on the antenna.
Manually screw in the ring nut of connector F.
Once the ring nut has been manually
screwed in, tighten by ¼ turn by means of a 11
mm wrench.
13. Remove the two safety straps found on the
azimuth and lifting gears.
S
WARNING
For a correct assembly, respect the installation
direction indicated in
Fig. 11
.
A different installation from the recommended
one could cause an incorrect operation of the
antenna due to the risk of water penetration into
the radome.
Operations to be carried out
inside
the boat.
1. Determine the correct position for the control
unit:
- it must be positioned near the satellite
receiver, as the provided coaxial cable is 1.5
m long;
- it must be reached by the power supply
cable coming from the power supply;
- it must be reached by the coaxial cable
coming from the antenna (10 m long);
- it must be positioned in a dry and ventilated
area (maximum operating temperature
45° C).
GL00095
Fig. 25
Connector not
provided
Central coaxial cable
conductor
Fig. 26