background image

 

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722 

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com 

©2022 M2 Antenna Systems Incorporated 

08/24/22 

Rev.03 

Model  ......................................... 303CP26 

Frequency Range ....................... 298 To 308 MHz 

*

Gain .......................................... 15.14 dBic 

Front to back .............................. 20 dB Typical 

Beamwidth   ............................... 30° Circular 

Feed type ................................... “T” Match 

Feed Impedance. ....................... 50 Ohms Unbalanced

 

Maximum VSWR ........................ 1.5:1 

Input Connector .......................... “N” Female 

Power Handling .......................... 1.5 kW 

Boom Length / Dia ...................... 140.625” / 1” 

Maximum Element Length .......... 20” 

Turning Radius: .......................... Call 

Stacking Distance ....................... Call 

Mast Size .................................... 1-1/2” to 2” Nom. 

Wind area / Survival ................... 0.6 Sq. Ft. / 100MPH 

Weight / Ship Wt. ........................ 5 Lbs. / 7 Lbs. 

 

M2 Antenna Systems, Inc. 

Model No: 303CP26 

FEATURES: 

 

The 303CP26 is a practical sized, yet high performance circular polarized antenna with a remarkably clean pattern. The 

pattern is important in order to match the antenna’s noise temperature with modern low noise preamps. This antenna is 

ideal for satellite work but is also excellent for terrestrial uses. 

 

The CNC machined driven element module is O-ring sealed and weather tight for low maintenance and long-term peak 

performance. Internal connected are encapsulated in a space-age silicone gel that seals out moisture and improves     

power handling. The 3/16” 6061-T6 rod elements are centered to minimize interaction and maintain good ellipticity.       

Insulators are UV stabilized and locked in place with stainless keepers.  Rugged  construction,  uncompromising          

performance for the boom length. 

SPECIFICATIONS: 

*Subtract 2.14 from dBi for dBd 

Summary of Contents for 303CP26






Reviews: