1 / 1
5.4.
1
REMOVAL OF THE TANK
General informations
You only need to remove the tank when it needs
replacing.
Related topics
Removal of the wheel cover
Removal of the discharge conveyor
• Remove the wheel cover’s rear part (Point «A»).
• Remove the collector channel
Close the fuel tap (1).
Remove the clamp (2), disconnect the fuel tube (3)
and empty the tank collecting all the fuel in a suitable
container,
taking care not to cause any leakage
.
Unscrew the two lower screws (4) and the upper screw
(5) fixing the tank (6) and remove the tank through the
machine’s right side.
When mounting, reverse the operations described
above, taking care to:
– always replace the fuel tube if it is deteriorated;
– replace clamps correctly;
– check there are no fuel leaks.
• Reassemble the collector channel
• Reassemble the wheel cover’s rear part
(Point «A»).
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
