Global garden products MJ66, Workshop Manual

Page: 47 / 88

MAP
3 / 3
5.6a.
2
REMOVAL OF THE REAR AXLE
hydrostatic drive models
General informations
The rear axle (Transaxle) is made up of single main ­
tenance free sealed unit which includes the trans­
mission unit and the differential.
It only needs to be removed to be replaced or for an
overhaul by the Manufacturer’s Service Centre.
Related topics
[ 4.2] Brake adjustment
[ 5.3g] Removal of the wheel cover
[ 5.8] Removal of the discharge conveyor
[ 5.9] Removing the lower part of the rear plate
[ 6.1] Replacement of tyres and wheels
Tightening torques
17­18 Nuts for bracket fastening .......... 25 ÷ 30 Nm
21 Rear axle fastening nuts ................. 20 ÷ 25 Nm
Loosen the upper nut (18) to give a minimum of move-
ment to the bracket (17), unscrew the nut (19) and
slide out the relative screw (20).
Carefully unscrew the four frame fastener nuts (21),
adequately supporting the unit so it does not fall.
To reassemble, reverse the order of the previous op-
erations.
Make sure the spacers (22-23) are correctly assem-
bled on the shafts.
Reattach all the connections, and then …
• Check the brake.
• Reassemble the rear wheels.
• Reassemble the collector channel.
• Reassemble the lower part of the rear plate.
• Reassemble the lower part of the wheel cover.
MODEL YEAR 2015
MJ66-Hy MJ66
WORKSHOP MANUAL
BACK