1 / 1
7.6.
1
ELECTRONIC CARD
OPERATION CHECK
General informations
Related topics
---
Safety and service supply check
This check is done by positioning a jumper between
terminal 10 of the wiring (2) and terminal 10 of the card
(1) in order to supply power to the card.
– The key in the «ON» position.
With the Voltmeter tester (Volt DC 0 ÷ 20), earth the
black ferrule and the red one on terminals 4-5-7-8
of the wiring connector (1). In every case, the tester
should indicate the battery’s voltage.
This value should never go under 11 Volts.
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
